Cheap loop vehicle detector, Buy Quality magnetic loop detector directly from China channel Suppliers: Nortech gate loop detector Magnetic Vehicle Loop Detector single channelAvailability:In stock Add to cart Add to Wishlist
Vehicle Loop Detector:
The detector must be installed in a convenient weatherproof location as close to the loop as possible. Installation location must choose to stay away from the heat source; it around other devices must maintain a distance of at least 10mm (must not installation close with boxes wall). A correct loop configuration and detector installation will ensure a successful inductive loop detection system. Loop of several important parameters include: loop figure, size, turns, install methods.
Supply voltage: 230V AC , 115V AC, 24V DC/AC, 12V DC/AC ( See the label on the detector)
Voltage tolerance AC: +10% / -15%
Voltage tolerance DC: ±15%
Power Consumption: 4.5VA
Output relays: 240V/5A
Operating temperature: -20°C to +65°C
Storage temperature: -40°C to +85°C
Frequency range: 20 kHz to 170 kHz
Reaction time: 10ms
Signal holding time: Unlimited / limited when loop is permanently covered 10 minutes
Sensitivity: Adjustable in 4 increments
Loop inductance: Total loop plus connection wiring: 50μH to 1000μH.
Ideal is100μH to 300μH
Loop connection wiring: Maximum length 20 meters, twisted at least 20 times per meter
Size of Housing: 78x40x108 mm (L x W x H)
Specific set the table below. In trial runs, first sensitivity in the lower stalls, the actual test vehicle detection if no response should be an increased sensitivity to stall, so repeated several times until the car seized stability for normal work.
Tags: loop vehicle detector, magnetic loop detector, channel, Cheap loop vehicle detector, High Quality magnetic loop detector, China channel Suppliers.
|Package Weight||0.35kg (0.77lb.)|
|Package Size||14cm x 14cm x 8cm (5.51in x 5.51in x 3.15in)|
|Color||12V, 24V, 110V, 220V|
|Place of Origin||Guangdong, China (Mainland)|
|color||red or black|